A Quick Overlook of – Your Cheatsheet

Undergoung Utilities and their Standard Colors

It is now easier to know what an underground utility line is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. If there is a need to dig the ground, it is very important that the utility lines first be identified. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. Otherwise it can be something disastrous. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. These incidents affect public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Calling 811 is enough for the property owner to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. Below are some of the colors used for different utility lines.

Proposed excavation sites use white lines. You can mark areas with white lines that will soon be excavated.

Pink lines are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.

Featured post: click here to read